![Router on a stick switch port config](https://burp.faraton.info/4.png)
![router on a stick switch port config router on a stick switch port config](https://docs.netgate.com/pfsense/en/latest/solutions/_images/interfaces-switch-vlans-group-3-edit-button.png)
Verify that the subinterfaces are now active.Ĭlose configuration window Part 3: Test Connectivity with Inter-VLAN Routing Step 1: Ping between PC1 and PC3. Therefore, in order to enable subinterfaces, you must enable the physical interface that they are associated with. Subinterfaces are virtual interfaces that are associated with a physical interface.
![router on a stick switch port config router on a stick switch port config](https://www.firewall.cx/images/stories/tk-cisco-routers-on-stick-1.jpg)
Configure interfaces F0/6 and F0/11 as access ports and assign VLANs.S1(config- vlan )# vlan 30 Step 2: Assign VLANs to ports. Instructions Part 1: Add VLANs to a Switch Step 1: Create VLANs on S1. You will then enable trunk interfaces and verify connectivity between VLANs. In this activity, you will configure VLANs and inter-VLAN routing. Part 3: Test Connectivity with Inter-VLAN Routing Scenario
![Router on a stick switch port config](https://burp.faraton.info/4.png)